Maplus Clean Liquid Cleaner (half a liter) is the miracle elixir to eliminate as it should all the used kerosene gunk and filth collected during your raids.HOW TO USE IT: Dear Rider, it's good to work your equipment carefully.A shower with this conditioner, will clean it properly, making it ready for the next processing steps.In case of waxing with FP4 perfluorinated waxes, carry out a first cleaning with FLUORCLEAN and following in the same way a second cleaning with CLEAN. If only paraffins or fluorinated paraffins have been used, perform the cleaning with CLEAN alone.Young Padawan Remember:Cleaning should always go from tip to tail:- Spread the cleaner evenly over the entire surface of the base with a brush or rag.- Wait a couple of minutes for the cleaner to take effect.- Brush the slab as needed with a soft brass hand brush to help the action of the cleaner.- Then clean off dirt and wax residue with fiberlene wrapped on the Plexiglas squeegee.- Dry as needed using the fiberlene.Before waxing, wait until the slab is perfectly dry. Maplus Cleans evaporate completely in 30' minutes at room temperature of 18C. It is possible to speed up evaporation with a jet of hot air.